John Deere 3025E vs. Kubota L2501: By the Numbers

Whether a commercial producer or a rural enthusiast, sometimes a compact tractor is just what’s needed. Powerful enough to plow through snow, mow large swaths of grass, or even till commercial gardens, the best compact tractors are still small enough to bring efficiency to the barnyard. And as two of the best-selling compact tractors on the market today, we wanted to see how the John Deere 3025E compares to the Kubota L2501.

 Priced around $19,000 and $14,000 respective, the John Deere 3025E and Kubota L2501 each bring nearly 25 gross engine horse power (HP), solid diesel technology, and a wide array of attachments.

Dimensions

2015 Kubota L2501

Built for rugged work in any environment, the Kubota L2501 four-wheel drive unit measures 106.3 inches in overall length without counting the Category 1 3-Point Hitch. With an overall width of 55.1 inches, the tractor stands in height 91.7 inches with the foldable Rollover Protective Structure (ROPS). With a wheelbase of 63.3 inches, the unit weighs 2,601 pounds. Significantly heavier than the sub-compact models, the machine still fits easily into most conventional storage facilities. That weight is sufficient to work well in snow or mud, and yet shouldn’t cause too much tracking on turf if used for commercial landscaping.

Meanwhile, the John Deere 3025E, spans 115.9 inches in green and gold length, 61.8 inches in width, has a height of 95.4 inches, and a wheelbase of 62.8 inches. The unit, in an open-station cab configuration, weighs 2,222 pounds. Large framed yet lighter than its counterpart, the compact tractor also fits into most sheds or barns.

If machine size matters, it’s a toss-up between dimensions and weight here, and whether the unit will be used for work in heavy mud or snow might make a difference there. Read below for attachments and do note that both units can be augmented with weights.

Engine and Horsepower

John Deere 3025E

The Kubota L2501 features a gross engine HP of 24.8, with a direct injection, vertical, water-cooled, four-cycle diesel. The three-cylinder engine produces a Power Take-Off (PTO) HP of 20.5 in gear, and 19 HSP, and brings a 10.0 gallon fuel tank. The standard transmission offers eight gears in forward and four in reverse (8F/4R), with a hydrostatic 3-range.

Meanwhile, the John Deere 3025E features a Yanmar EYDXL 1.64NDA diesel engine with 24.7 HP, and PTO of 19.4 HP at 2,400 RPM. Fuel tank capacity is 7.5 gallons, and the machine also sports a hydrostatic transmission. The three-cylinder engine features Final Tier 4 emissions compliance.

With near equal ratings in term of engine power and HP, the biggest difference to note is the size of the fuel tank. When purchasing a compact tractor, proximity to fuel sources might be an issue, whether one has tanks at the farm, or if they have to haul fuel to the location. Time spent refueling is time not working.

Attachments and Implements

Kubota L2501

Both models are built to customize with attachments and implements, and the Kubota and John Deere family of machines certainly bring options in that department. The Kubota L2501 is built ready to attach to the LA525 front loader, as well as the BH77 and BH92 backhoe. Other Kubota attachments for this category of machines include quick hitches, rotary tillers, cutters, and mowers.

The John Deere 3025E also comes equipped for a foldable ASABE S478 Rollover Protective Structure (ROPs), tractor weights, and front loaders. The John Deere compact tractor family comes with more than 200 attachments as well as Quik-Hitch and Quik-Knect technology. For fence post drills, hay equipment, or mowers, the Big Green Machine has quite a selection.

Whether buying a tractor through a traditional brick-and-mortar dealer or online, the value to buying either a Kubota or John Deere is access to parts and accessories. Both brands are well-supported at stores and dealers throughout the country. In terms of implements and attachments, this really is a match-up of equals. The biggest question is orange or green.

Warranty

The Kubota L2051, along with all BX, B, LX, and L tractors, features a warranty plan for non-commercial home and residential use: Basic Standard Limited of 24 months or 1,500 hours, and Limited Powertrain of 72 months or 2,000 hours, whichever occurs first. For commercial use, the Basic Standard Limited plan is 24 months or 1,500 hours, whichever occurs first, and a limited powertrain plan of 36 months or 2,000 hours.

The John Deere 3025E offers a 6-year, 2,000-hour limited powertrain warranty and other elements of the usage can be negotiated at purchase.

Price

John Deere 3025E Working

Pricing tractors is a genuine art, with all of the various options available. The same obviously holds true concerning attachments, implements, and various package plans. The Kubota L2501 is available online with MSRP as low as $13,652. The Kubota purchases are also open for select financing packages of $0 down and 0% APR for up to 84 months, as well as Farmer Veteran Coalition Memberships, and 2021 Equine Membership Purchasing Programs.

The John Deere 3025E starts out with an MSRP of $18,879 and comes with opportunity for a $139 monthly payment option and other programs up to $2,000 savings with cash purchases. Granted, most folks in the market for a compact tractor will be using their own financing plans or farm lines of credit. Both Kubota and John Deere models are sold all over the world with deals always available. That said, in terms of pricing options, the Kubota is considerably lower.

Compact Tractors Make Sense

These days, compact tractors are amongst the most versatile products on the market. With HP ranges up to 40, and 540-RPM PTO’s, these machines all have Category 1 3-point hitches for implements. A do-it-all tool carrier, these models work as well for landscapers as they do farmers and large commercial property owners. With a weight under 4,000 pounds, they’re light enough to not wreck a property with tracks, but powerful for backhoes and front-end loaders, as well as rotary mowers.

Like most in their class, the Kubota L2501 and John Deere 3025E can be customized to high level, with most implements designed just for this grouping of tractors and clients. Whether to be used for a public school corporation, or a U-Pick berry operation, the compact tractor is still king of the range when it comes to getting the job done efficiently.

Best 30 Horsepower Tractors Available Today

They’re the go-to equipment of rural America – the 30-horsepower range, sub-compact and compact tractors. Loosely defined as tractors with horsepower ranging from 26-34, their pickup truck equivalents would be the Chevy Colorado, Ford Ranger, or Dodge Dakota. Great for mowing with a bush-hog, hauling yard waste, spreading manure, drilling fence-posts, or anything requiring a small front-end lift, the best 30 horsepower tractors can do just about anything you need done short of disking 500-hundred acre fields and hauling wagons full of grain.

Priced at budget-conscious levels, fans of these models run the entire spectrum of folks, from suburbanites needing snow removal and farm hobbyists mowing pastures, all the way up to full-scale ag-producers cleaning out feeding lots. What makes for the best 30hp tractor really depends on the users’ needs, budget, proximity to dealer support, or familiarity with the models sufficient to work on themselves with parts bought online.

Below are our top 5 30 horsepower tractors to check out with our spec analysis for review.

Kubota L3301

Kubota L3301

Among the more popular 30hp tractors tooling about the trails, the Kubota L3301 comes in both 2- and 4-wheel drive options. The direct injection, vertical, water-cooled, 4-cycle diesel engine kicks out 33 horsepower gross, with 31.4 horsepower net, and 27.7 at the PTO. A 3-cylinder unit, the bore and stroke measure 3.4 x 4.0 inches, with a total displacement of 111.4 and rated speed of 2,700. As typical with tractors this size, the machine runs off a 12-volt battery and 12-volt, 40-amp alternator. Fuel tank capacity is 11.1 gallons, and the PTO/engine speed cranks out at 540/2,430. The tractor features a Category I 3-point hitch with lift capacity at all points of 1,985 pounds, and 1,433 pounds at the 24-inch behind-lift points. Traveling speeds go up to 14 miles per hour forward and 12.7 in reverse. The machine itself is sized to manage, with an overall length of 107.9 inches, width of 55.1 inches, height of 91.7 inches, and a 63.3-inch wheel base. Total machine weight ranges 2,557 to 2,778 depending on drive options. Learn more here.

John Deere 3025D

John Deere 3025D

There’s a reason John Deere green dots the American landscape with the frequency it does, and the 3025D model is quite frequently seen among the ranks.  With a 24.7 horsepower engine and 20 horsepower at the PTO, the direct injection Yanmar engine sports three cylinders with a displacement of 100.2 cubic inches. With cast-in-block cylinder liners, the bore and stroke measures 3.46- x 3.54 inches with a compression ratio of 19:1:1. Engine torque is at a rated speed at 53.4 pounds-per-foot. The unit’s fuel tank capacity is 9.7 gallons The John Deere 3025 features a Category I hitch type with 1,640-pound lift capacity at 24-inch behind the link arms. The unit operates off an 8-forward and 8-reverse synchromesh shuttle shift gear transmission. Total weight of the open-station cab unit is 2,778 pounds with a 62-inch wheelbase. Hauling capacity exceeds 4,409 pounds and the contoured, comfortable seat adjusts both forward and backwards. Learn more here.

Mahindra 1626 HST

Mahindra 1626 HST

Part of the top-selling 1600 series, the Mahindra 1626 HST operates of a four-stroke, naturally aspirated, indirect injection, water-cooled diesel engine sporting 25.9 horsepower at 2,500 RPM. The three-cylinder unit offers a displacement of 80.4 cubic inches and utilizes a 7.1-gallon fuel tank. An infinite number of speeds are afforded by the HST-3 transmission with a dry-single clutch and wet disc braking system. With a live PTO, top rear speed is 540 at 2,376, with mid-PTO at 2,000 at 2,526, and total PTO horsepower at 19 horsepower. The Mahindra 1626 HST features an implement pump output 7.5, and maximum total flow of 10.8. The unit features a Category I 3-point hitch with telescoping stabilizers and lift capacity of 2,646 pounds. Powered by a 12-volt battery and 12-volt, 50-amp alternator, the machine’s total weight is 2,459 pounds. Measuring 121.3 inches in length, with an overall width of 63 inches, height is 81.5 inches, and the wheelbase is 67.3 inches. Learn more here.

New Holland Boomer 40

New Holland Boomer 40

Big Blue comes through by way of the New Holland Boomer 40 – one of the best 30-horsepower tractors in the industry. With 30.2 horsepower and a rated speed of 2,600, the four-cylinder diesel engine kicks out a displacement of 2.5. The battery is powered by way of a 50-amp alternator and the machine is fueled off a 9.5-gallon tank. A hydrostatic transmission sports three ranges off a synchro, twin-pedal, shuttle type. Maximum forward speed is 15 miles per hour, with a maximum reverse of 14 miles per hour, all with a mechanical, wet, multi-disc braking system. The New Holland Boomer 40 offers a Category 1 3-point hitch with a lift capacity of 2,755 pounds and hydrostatic steering. The electro-hydraulic-engaged PTO horsepower comes in at 34/32 with rear speed at 540 RPM, mid-speed at 2,000. The Big Blue machine measures 306 inches long, with a height to the top of the ROPS frame of 245 inches, and a 176-inch wheelbase. Total weight is 3,737 pounds. Learn more here.

Massey Ferguson 1735E

Massey Ferguson 1735E

Red and gold, big and bold, the Massey Ferguson 1735E brings 34 horsepower to the game, along with an independent HST transmission-driven PTO horsepower of 29. The Tier 4 Final, 1.5 liter, three-cylinder, liquid-cooled Shibaura engine offers an engine speed of 2,600 RPM and 8×8 Synchro Shuttle or 3-range HST transmission with open center hydraulics. Hydraulic capacity is 9.7 with a Category I three-point hitch and lift capacity of 1,598 pounds at the 24-inch mark behind the pins. Total unit weight is 2,734 pounds with a length of 122 inches, width of 64.2 inches, and cab height of 91.3 inches. The Massey Ferguson 1735E comes with a five-year powertrain warranty and ongoing support. Learn more here.

30 Horsepower Tractor Implements

One of the great things about the 30 horsepower tractors is they’re built to accessorize with implements.

Behlen Rotary Cutter

The Behlen Country Sub-Compact Rotary Cutter 4-Feet model offers an easy fit for sub-compact or compact tractors. With dimensions measuring 69 x 55 x 19 inches, the unit weighs 400 pounds and goes well with any of these models for bush hogging purposes.

Buy Now
Behlen Grader Blade

Another worthy implement to accompany your 30hp tractor is a Behlen Country Medium Duty Grader Blade, 6-Feet model. Ideal for driveway maintenance, snow removal, dirt and gravel spreading, the 72 x 54 x 72-inch unit weighs 228 pounds and likewise fits most makes and models.

Buy Now

We are committed to finding, researching, and recommending the best products. We earn commissions from purchases you make using the retail links in our product reviews. Learn more about how this works.

Kubota Sub Compact Tractors Buyer’s Guide

One of America’s top selling sub-compact tractor series, the Kubota BX family of machines has the country seeing orange. Kubota sub compact tractors have long been a staple of the company, built to a fit a wide range of implements from mowers to loaders. But if a perfect combination of size and power are what you’re seeking, then the Kubota BX1880, Kubota BX2380, Kubota BX2680 and Kubota BX23S might just be for you.

Engineered with a height of less than 84”, this series of Kubota sub compact tractors is built to fit through standard garage doors without having to fold the Rollover Protective Structure (ROPS), although the unit does fold easily enough without tools if a lower obstruction is met. A flat operating station, tilt steering and a deluxe seat with armrest are also features of this model series, along with ergonomic placement of levers and instrument panel. And while Kubota quality engineering is included with each model, there are a number of individual differences buyers might want to keep in mind as they shop about for the perfect sub-compact tractor.

Kubota BX1880

Bringing the bang for the bucket so to speak, the Kubota BX1880 features a liquid-cooled three-cylinder diesel Kubota D722 engine with gross HP at 3200rpm of 16.6, PTO horsepower of 13.7 with 43.9 cu.in displacement. The drive train features an HST, High-Low gear shift with two forward and reverse for the four-wheel drive and wet disc braking system. Equipped with a three-point hitch, lift capacity is 680 pounds at the 24-inch mark behind the pins. Size-wise, the Kubota BX1880 is 95.5” long with a width of 44.1” and height of 81.9” with the ROPS and weight of 1,336 pounds.

Kubota BX2380

Kubota BX80 Sub Compact Tractor

The Kubota BX2380 represents the mid-level of the line offerings, with a liquid-cooled three-cylinder diesel Kubota D902 engine with gross HP at 3200rpm of 21.6, PTO horsepower of 17.7 and 54.8 cubic inches of displacement. With a drive train featuring the HST, High-Low gear shift with two forward and reverse, the machine features four-wheel drive and a wet disc braking system. The SAE Category I three-point hitch has a 680-pound lift capacity at the 24-inch mark behind the pins. The Kubota BX2380 is 95.5” long with a width 45.1” and height of 83.1” with the ROPS and weight of 1,443 pounds.

Kubota BX2680

The Kubota BX 2680 brings more size and power to the family here with a liquid-cooled three-cylinder diesel Kubota D1005 engine with gross HP at 3200rpm of 24.8, PTO horsepower of 19.5 and 61.1 cubic inches of displacement. A drive train featuring the HST, High-Low gear shift with two forward and reverse, the Kubota BX2680 has an SAE Category I three-point hitch with 680 pounds of lift capacity at the 24” mark behind the pins. The machine is 83.1” high with the ROPS, 45.1” wide and weighs 1,521 pounds.

Learn more about the Kubota BX 80 Series here.

Kubota BX23S

Kubota BX23S

The Kubota BX23S brings the multi-tasking element with backhoe and loader. The tractor itself has identical ratings to the BX2380, although the three-point hitch is optional and total weight is 1,570 pounds. Equipped with the backhoe model BT603, the unit has a bucket cylinder digging force of 1,936 pounds, with dipperstick cylinder digging force of 1,171 pounds. With a one cylinder boom swing mechanism the Kubota BX23S has a digging depth of 6’1” and swing pivot to rear axle center line of 28.6”. Bucket rotation is 180 degrees with a swing arc of 140 degrees. The BX23S loader model type LA340 has a max lift height of 71” with 52.1” dumping clearance and reach of 25.4”. Maximum dump angle is 45 degrees with 54.8” reach with bucket on the ground. Bucket rollback angle is 29 degrees with a digging depth of 4.9” and lift capacity of 509 pounds. Breakout force is 987 pounds and raising time/lowering time is 3.3/2.5 seconds.

Learn more here.

As with all Kubota sub compact tractors, the BX family comes ready to work with any number of high-quality implements, from mowers and harrows to rear blades and landscape rakes. Other options for this series include a heated, dealer-installed cab. The perfect size for homeowners and farmers alike, there’s a reason the Kubota sub compact tractors remain a top selling series across the United States.

8 of the Best Kubota Attachments

Kubota attachments are a wise investment, as farmers and landowners alike polish their Big Orange machines and prepare to break ground. With a full range of tractors and equipment spanning large to small, Kubota attachments are built to fit the spectrum of needs as well. But choosing the best Kubota tractor attachments can be tricky. As Kubota is one of the biggest names in tractors big and small, the Internet is full of options of every kind.

Kubota also has a nationwide dealer network with both new and used models at every price point. But with so many options, and as everyone knows, only so much money to go around, it does make an enthusiast feel like a kid in a candy store at times. With that in mind, below is a list of some of the best Kubota tractor attachments available to serve as inspiration for your consideration as you prepare for the coming spring.

1. Multi-Purpose Disc Cultivator Garden Bedder

Disc Cultivator and Garden Bedder: Kubota Attachments

Built to last, the 48” wide Kubota attachment comes in orange and uses 2” x 2” heavy wall steel tubing and is compatible with most off-the-shelf clamps and other Kubota attachments. Equipped with a 2” receiver mount, the fully adjustable 14” disc hiller clamps so even sub-compact tractors can tackle wider or flatter hills. A unique sleeve design allows the user to adjust the toolbar from side-to-side, requiring less time. Great for shaping and tilling of any kind.

Buy Now

2. Titan 4000-Pound Capacity Clamp-On Pallet Forks

Titan Pallet Forks

Built to work with Kubota tractors as well as others, these pallet forks can augment your farm or home operation in terms of hauling. With 4000 pounds of capacity, these forks can handle loads from fence posts, lumber pallets, or bags of mulch. Built with roll back protection slots, these forks keep the heaviest loads right where they need to be, and offer chain holes for further security. Forks are 43” long with a width of 4”, with a total length once installed of 60”.

Buy Now

3. Titan 48” Grapple Bucket Tractor Brush Root

Grapple Bucket: Kubota Attachments

Get a grip on that brush to haul, whether from old fence rows or part of yours woods. Offered in 48”, 60”, 72” and 84” options with a universal skid steer style hookup with greaseable pins and bushings. The attachment weighs 450 pounds with a 48” wide opening. Hoses and flat-faced couplers are included with a single 3000 PSI cylinder. Teeth thickness is 3/8” with length of 24”.

Buy Now

4. Titan Skid Steer 42” Pallet Fork & Trailer Hitch Attachment

Titan Skid Steer

Big loads need the right attachment and this Kubota-friendly unit can support up to 3000 pounds, whether logs, timber or firewood. With a solid 105-pound frame and fork blades that measure 42” in length, the overall attachment has a width of 45.5” and a height of 19”. Equipped with a standard 2-inch hitch receiver to hook to, this attachment works with Kubota as well as other mowers and haulers. Available with 36”, 42”, 48” forks and frame only. Built with convenience in mind, it’s easy to hook up and off and is one of the best Kubota BX23S attachments you’ll find anywhere.

Buy Now

5. WARN 78950 ProVantage Steel Plow Blade with Wear Bar

Warn Plow Blade

For snow and ice, this plow attachment works like a charm. Available in 50”, 54”, 60”, 66” and 72” and made from thick 12-gauge steel with heavy duty ribbing, the plow is built for performance and easily attaches to Kubota tractors of various sizes. Designed with a center cross member for added rigidity, its boxed design adds extra support.

Buy Now

6. Steel Quick Tach Attachment Mount Plate Skid Steer Loader

Quck Tach Attchment Mount Plate

Made of Grade 50 structural steel, the 5/16” thick mount plate can easily weld or bolt onto plows, forks or any attachment needed to convert to quick tach hookup. Fits with most Kubota tractors as well as skid steers with a universal tach mounting system. Total weight is only 58 pounds with an outside width of 46”, inside width of 45”, height of 18.5” and a top bar of 3/8.”

Buy Now

7. CURT Weld-On Trailer Hitch Receiver Tube

CURT Trailer Hitch

This standard fit hitch receiver tube features inside dimensions able to accept most 2-inch by 2-inch shanks, including trailer hitch ball mount, tow hook or other receiver hitch accessories. Strength at the opening is maximized with a fitted ½-inch reinforcement collar. The weld-on hitch receiver comes with a raw steel finish to allow for welding into place right out of the package and is pre-drilled holes for trailer pins.

Buy Now

8. Titan 60” Grapple Bucket and Tractor Hay Spear Attachment

Titan Grapple Bucket

This universal skid steer style hook up features hose springs which keep the hydraulic hoses from getting pinched while using. Greasble pins and bushings, hoses and flat-faced couplers are included. Designed with cylinder back stoppers to prevent the upper clamps from getting stuck in the upright position or hyper-extended, this grapple bucket/hay spear is one of the best Kubota attachments available and comes with twin 3,000 PSI cylinder and offers a 3,000 pound capacity.

Buy Now

We are committed to finding, researching, and recommending the best products. We earn commissions from purchases you make using the retail links in our product reviews. Learn more about how this works.

Kubota LX Series of Compact Tractors Unveiled

Kubota Tractor Corporation today unveiled its new LX Series to the company’s compact tractor line. The new LX Series offers three models including the affordable entry-level LX2610SU ROPS model and the well-equipped LX2610 and LX3310, both of which come with ROPS and cab model options. Designed with both residential and commercial operators in mind, the LX Series has the versatility to tackle rural residential tasks while providing the power and comfort to handle commercial applications as well. The new LX Series compact tractors will be available nationwide at authorized Kubota dealers beginning in late spring 2020.

“With the new LX Series, Kubota will bridge the gap for customers who prefer a smaller chassis size similar to the B Series but need some of the additional power and functionality of our L Series tractors,” said Kelcey Cockrell, Kubota product manager. “This new series is a crossover and will meet the needs of residential property owners as well as professional operators for snow removal and landscaping applications.”

A New Level of Power and Versatility on a Compact Chassis

Kubota’s LX Series compact tractors are powered by world-renowned Kubota diesel engines ranging from 24.9 to 30.8 gross engine horsepower. The LX3310 model features a Kubota Common Rail System diesel engine that provides better fuel economy and lower emissions as well a high level of power, torque and performance, even in cold weather. The LX Series provides a maneuverable, compact size that is capable of operating 60-inch and 72-inch mid-mount mowers, yet powerful enough for a front loader with a lift capacity of more than 1,000 lbs., backhoe, front snow removal implements, and a 3-Point Hitch for a wide variety of rear implements including five-foot rotary cutters, box blades, tillers, post-hole diggers and more. The LX Series also features Goodyear® R14 crossover tires, made by Titan International, Inc., with a new hybrid tread design optimized for performance for a variety of snow, ice, turf or mud applications.

Complete Comfort with ROPS and Cab Model Features

Operator comfort and functionality are top priorities for the LX Series, which is available in both a deluxe ROPS open station and factory cab model. The factory cab model is equipped with a 4-pillar integrated cabin, and includes an air conditioner and heater, front LED work lights, cabin interior light, front and rear wipers with washer, rear defogger and speakers. Both ROPS and cab models feature cruise control, tilt-steering, and a new deluxe suspension seat and armrests with deeper suspension that keeps operators comfortable and productive.

LX2610SU: LX Power at an Entry-Level Price Point

The new LX Series features an entry-level, affordable model, the LX2610SU. The LX2610SU provides both value and quality with deluxe features to maximize performance including a Kubota-built front loader and backhoe, multiple tire options and a Category I 3-Point Hitch to connect performance-matched Land Pride implements to match a wide variety of applications. Available in a ROPS model, the LX2610SU is the perfect option for first-time tractor buyers looking to prioritize power in their compact tractor.

2018 Kubota RTV-X1120 Unveiled

Kubota Tractor Corporation, the best-selling diesel utility vehicle manufacturer in North America since 2004, enhances their current market standards with the introduction of the new RTV-X1120 models, Kubota’s most well-equipped utility vehicle at the best price among its competition. Designed for the commercial customers who use these machines for heavy duty work every day, the Kubota RTV-X1120 combines Kubota quality with enhanced power, torque and performance at a starting price point of $13,999 MSRP. (more…)

Kubota Donates Equipment for Hurricane Harvey Relief

Governor Greg Abbott today joined officials from Kubota Tractor Corporation, Commissioner John Sharp and local elected leaders in Fulton, Texas to announce a $1 million dollar donation of funds and equipment from Kubota to the Hurricane Harvey relief effort. This donation will help provide the people of Aransas County and surrounding areas with the equipment and tools they need to help clear debris and expand efforts to rebuild businesses, homes, and entire communities that were devastated by Harvey. Following the announcement, the Governor expressed his thanks for Kubota’s generous contribution to the relief effort and to helping Texans in their time of need. (more…)

Kubota Introduces New Products at Annual Dealer Meeting

Kubota Tractor Corporation announced the introduction of several new products from the field and main stage of the company’s annual dealer meeting this week in Phoenix, Arizona. Adding to all segments of its business, the company announced the following:

A new addition to its popular utility vehicle line with the new gas-powered RTV-XG850 Sidekick, the company’s fastest utility vehicle yet; (more…)

Kubota Announces Plans for $87 Million Expansion in Kansas

Kubota Tractor Corporation officially confirmed today its plans to plant solid roots in Kansas for its North American Distribution Center (NADC) by announcing the details of its letter of intent to purchase 203 acres near the company’s current leased facility in Edgerton, Kansas. The company plans to design and build two, one million square foot, facilities to expand their distribution capacity and streamline logistics processes for the timely delivery of Kubota branded service parts and equipment to its increasing customer base in the U.S. (more…)

Kubota Introduces Four New Utility-Class Specialty Ag Tractors

Kubota Tractor Corporation introduces four new specialty ag tractors designed for narrow and low-clearance applications. The new M-Series introductions include the M4N-071, M5N-091 and M5N-111 narrow tractors, and the M5L-111 low profile* tractor. Engineered to combine Kubota power and performance with versatility and reliability, the new M-Series specialty tractors bring more variety, performance and operator options to the orchard and vineyard markets. These tractors are available at Kubota dealerships now.

“Through dealer and customer feedback we have learned vineyard and orchard managers are looking for higher horsepower, more versatile tractors. We designed Kubota’s new M-Series specialty models to meet their specific needs and harvest demands,” said Tyler Pittson, Kubota compact and utility tractor product manager. “Take a seat in any one of these new tractors and you’ll understand why they stand out against the competition.” (more…)